Ultra Pro-Flex Powder Adhesive 20kg Grey SP

Pro-Flex
Ultra Adhesive

Ultra ProFlex SP is a wall and floor tile adhesive for both interior and exterior use. The adhesive combines flexural capacity with excellent bond strength. Ultra ProFlex SP is specifically formulated for use with low porosity substrates such as fully vitrified tiles and power floated floors. The products qualities make it ideal for fixing glass, natural stone and porcelain tiles. Suitable for both wet and dry conditions including communal showers and swimming pools.

Buy in Piece Qty

Indoor
Outdoor
Wall
Floor

Use: Floor Adhesive
Material: Adhesive
Colour: Grey
Group: Pro-Flex
Price Per Adhesive: £22.97 ex VAT
£26.99 inc VAT

Price per Piece: £22.97 ex VAT; £ 26.99 inc VAT

Quantity: Piece

How much adhesive will I need?

How much adhesive will I need?

Enter the area you are tiling and we'll work out how much adhesive you need to buy.

Choose Bed Thickness

Area Tiling
m²

KG Required

SubTotal
£0.00 ex VAT

No stock 0 Piece(s)

This is out of stock

Leave your Name & Email and we'll alert you when this product's back in stock.

Full Name

Email Address

Telephone

Subscribe to newsletters

Add to Checklist

More Information

Bagged product ready to mix
Mould resistant and shower proof
Open time 20-30 minutes, self priming and set time 24 hours
Manufactured in a plant whose quality management system is certified/registered as being in conformity with BS EN ISO 9001:2000, 14001:2004 and OHSAS 18001
Ultra powder adhesive give top quality tile fixing time and time again

Ask a Question or leave Feedback about this product

Submitted by Jeremy* 16:22 Thu 4th March 2010* Reply (1) Hi, I'm thinking of laying this with your 450mm iron grey porcelain tiles on a 9mm WWP plyboard floor and plastered wall for a bathroom, Is this the correct stuff? 3mm bed and 6mm notch on 6.5m2 of floor and 12m2 of wall. How much would I need? ReplyHi Jeremy, this adhesive is perfect use for a floating floor. However, the Iron Grey tiles are floor tiles, please make sure that the wall can take the weight before you order. For 6.5m2 of flooring with the specifications you will need only 2 bags of this product. There is a product calculator that can help you choose which is best. Just click the calculator button underneath the quantity required box. I hope this helps! Happy Building! Submitted by 13:55 Tue 9th March 2010

Submitted by Mark Gibbons* 17:26 Sat 13th February 2010* Reply (1) Is this stuff suitable for laying granite slabs (500mm by 400 - 800mm) onto a exterior concrete slab for a patio? What depth bed is required? thanks Mark ReplyHi Mark, This product will be ideal for that kind of laying. I would recommend a thicker bed for outside, just so the tiles have more room to expand in the weather changes. Also, please remember that as it is outside, not to use the dot and dab method of laying, as this can create air pockets under the tile and can crack with weight. I hope this helps! Happy Building! Submitted by 10:42 Wed 17th February 2010

Submitted by mach* 15:01 Mon 7th December 2009* Reply (1) Hi, how many bags will I need to tile 16 square meters? Thanks ReplyHi Mach, yes for 16 square meters with a notch of 6mm and a bed of 3mm thick, you will need 4 bags. For some heavier tiles you might want to consider a 9mm notch and a 6mm bed, this will need 8 bags. You can use our calculator to work out these figures, just click the blue writing underneath the quantity. I hope this helps. Happy Building! Submitted by 16:06 Wed 9th December 2009

Submitted by Aaren Macksoud* 12:31 Thu 22nd October 2009* Reply (1) Hi, how many bags would I need to lay about 1000 sq meters of Mosaic Tile, and can I use this product on top of old tiles?? Regards and thanks Aaren ReplyHi Aaren, the quantity of bags for 1000sqm will vary in the way it is laid. A mosaic, should not be so heavy so could suffice with a smaller bed. A 2mm bed will produce 4.4 sq meters, so it will need 228 bags. If you would like any more assistance please contact our helpful customer service team on 08000 192 405. Also, this adhesive should be strong enough to lay on top of old tiles. However, I would recommend removing old tiles, as this will make the installation job a lot easier for yourself. Happy Building! Submitted by 14:10 Thu 22nd October 2009

Submitted by Dominic* 11:25 Tue 6th October 2009* Reply (1) Hi, is this item the best for low porosity polished porcelain size 600x600x10. If so how many bags for 25 m2 and what bed thickness for applying to the wall? Thanks ReplyHi Dominic, this product will need to be sealed, most porcelain will need to be sealed unless it has been glazed, which means it has been protected. A strong bed of adhesive is a neccessity, for 25sqm and a bed of 6mm and a 9mm notch you will need 12 (20kg) bags. However, it is possible to get away with a smaller notch (6mm) and a bed of 3mm, which is 6 bags. This product is the best, Ultra Flexible Adhesive: http://www.buildersuperstore.co.uk/products/ultra_pro_flex_powder_adhesive_20kg_white_es/index.html Submitted by 16:57 Thu 8th October 2009

Submitted by ian clifford* 17:41 Sat 20th December 2008* Reply (1) Hi, I just removed old vinyl floor will ultra be ok to use on top of the old glue residue? Thanks ReplyHi Ian, this product is ideal for this requirement, one recommendation is that the surface area is free from dust or any form of residue before application. Use one of our cleaning products for maximum results http://www.buildersuperstore.co.uk/products/hg_remover_1_0_l/index.html Submitted by 17:00 Tue 9th June 2009

Submitted by Ann Manders* 12:46 Thu 13th November 2008* Reply (1) Hi, is this product suitable for large slate flagstones (biggest size 1200 mm x 900 mm) laid over hot water underfloor heating with a concrete screed? Thanks ReplyHi Ann, this product is perfectly suitable for these requirements, one recommendation is to have a 12mm notch and a 9mm bed at least. Happy Building! Submitted by 15:52 Tue 9th June 2009

Submitted by clive walker* 18:30 Wed 16th July 2008* Reply (1) Hi, is this suitable for your slate floor tiles, and how many 300 x 300 would 1 bag fix. Thanks ReplyHi Clive, this bag will vary in the area coverage, depending on the size of the bed you want to lay. For heavy products like natural slate it may need a 6mm thick bed so one bag will produce 2.2 sq meters. A 2mm bed will produce 4.4 sq meters and 9mm bed a 1.45 sq meter area. Happy Building! Submitted by 16:13 Mon 8th June 2009